選單
免費軟體資源 linux nic duplex 主題文章

ethtool_opts speed 100 duplex full autoneg off

ethtool_opts speed 100 duplex full autoneg off

Here is a quick how to force your network interface speed and duplex on RHEL/CentOS Linux. Make sure you have the network tools installed : Command Shell 1 yum install ethtool net-tools ...

相關軟體 Network Monitor 下載

Network Monitor is a network diagnostic tool, which is able to monitor local area networks and can provide a graphical display of network stats. Network admins can use these stats to perform ...

了解更多 »

ethtool_opts speed 100 duplex full autoneg off 相關資訊

  • 例如：ethtool -s eth0 speed 100 duplex full autoneg off 此指令将eth0设备设置为全双工自适应，速度为100Mbs。若要eth0启...
    ethtool - 百度百科 全球最大中文百科全书
    https://baike.baidu.com
  • 例如：ethtool -s eth0 speed 100 duplex full autoneg off 此指令将eth0设备设置为全双工自适应，速度为100Mbs。若要eth0启...
    ethtool 命令详解 - CSDN博客
    http://blog.csdn.net
  • ethtool speed 100 duplex full autoneg off sets the eth0 device to 100Mbs, full duplex, wit...
    How do I add ethtool settings to a network device ...
    https://sysadmincorner.wordpre
  • # ethtool -s eth0 speed 10 duplex half autoneg off The next command disables Auto-Negotiat...
    HowTo: Change Speed and Duplex of Ethernet card in Linux - ...
    https://www.shellhacks.com
  • Here is a quick how to force your network interface speed and duplex on RHEL/CentOS Linux....
    Linux : Force network interface speed and duplex with EthToo ...
    http://www.itechlounge.net
  • ETHTOOL_OPTS="speed 100 duplex full autoneg off" Save and close the system. It w...
    Linux add ethtool duplex settings to a network card ...
    https://www.cyberciti.biz
  • 例如：ethtool -s eth0 speed 100 duplex full autoneg off 此指令将eth0设备设置为全双工自适应，速度为100Mbs。若要eth0启...
    LINUX命令之ETHTOOL用法详解 - 摩斯电码 - 推酷
    https://www.tuicool.com
  • ethtool -s eth0 autoneg off speed 100 duplex full ethtool eth0 regards, jarek Share this p...
    PIF ethtool settings, full duplex not working. - Networking ...
    https://discussions.citrix.com
  • Hi, Besides editing /etc/modules.conf or ifup-post script, you can add the line below: ETH...
    [TIP] force full duplex during bootup using ETHTOOL_OPTS ...
    http://www.redhat.com
  • fedora: 要設定eth0的預設設定 編輯/etc/sysconfig/network-scripts/ifcfg-eth0 在內容中加入 ETHTOOL_OPTS=&quot...
    用ethtool設定網卡 « z956's Blog
    http://z956.logdown.com